Using a Phone Speaker to Clean It

Lint, dust, and other types of filth accumulate in your smartphone speakers over time, and you may not even realise it. And if you don't clean them for an extended period of time, you'll notice that your sound becomes muffled and distorted. There are a few wonderful do-it-yourself solutions for cleaning your speakers, both from the outside and from the inside of the phone, that you should try first before taking it to the shop.

Using Common Household Items to Clean Your Speaker's Dirt

Make a note of where your phone's speakers are situated. Typically, the iPhone's speakers are found on the bottom of the device, to either side of the charger port. Similarly to Apple devices, fix my speaker dust are normally located on the bottom, but just to the left or right of the charging connector. When it comes to smartphones, ear speakers are nearly typically found on the top of the front face, where you would place your ear to listen to music.

Consider Other Speaker Locations, Such as the Side of the Phone Near the Volume Button or the Bottom of the Phone's Front Face.

Swab the outside of your speakers with a cotton swab to disinfect them.

Use light circular motions to move it over your speaker holes, applying a small amount of pressure. Continue in this manner until all of the dirt has been removed from the surface. Using your finger, press the swab into the speaker holes if they are large enough. Pressing too hard will damage the cotton at the tip, so only enough pressure will get it to fall into place. Apply a little pressure to the swab as you rub it left and right inside the mouth cavity.

Cotton swabs should be swapped out as they become clogged.

If You Want Better Results, Apply a Small Bit of Rubbing Alcohol Onto Your Cotton Swab Before You Start Cleaning.

Using a small ball of sticky tac, press it into the speaker holes until it is adhered. Using the sticky tac, cut out a 1 inch (2.5 cm) piece and begin pressing it into a ball. It should be soft and flexible after a few compressions. Next, press it against the speaker holes to secure it in place. In order for the adhesive tac to enter the speaker, you must apply sufficient force. Hold it in place for 2 to 3 seconds before removing it— fix phone speaker dust should have adhered to the sticky tac during this time period. Continually repeat this procedure until no more dirt is visible coming out of the speakers.

Ensure that you're constantly working on a clean surface with your sticky tac by moving it around.

Sticky Tac Can Be Purchased at Office Supply Stores or From Online Vendors.

Use a medium-bristle toothbrush to clean small speaker grills. Pinch your phone's top or bottom with the brush and move it to one of the two ends. Keep it parallel to the top of your phone's screen and move it up and down in quick motions to make it more comfortable. Next, turn your toothbrush vertical (parallel to the side of your phone) and clean by sliding it in left and right motions on the surface of your phone.

Using the bottom bristles, angle the brush upward and scrub at the debris with your fingers.

To clean the speaker holes, always use a medium-bristle brush; soft bristles aren't effective at removing dirt, and harsher bristles are too thick to go into the small speaker holes.